A unique footplate design with special features, including two front engaging tabs which enable automatic and quick self aligning of the bolting holes rotating into position.
The tabs prevent rotation of the uprights at the base as they interlock against the upright's web.
The footplate incorporates a locating dimple offering resistance against lateral forces/slipping when used with shim plates with corresponding dimples.
The footplate is fixed to the upright using a single bolt through an extended 'shoe' and is outward facing with three 14mm-diameter holes that accept 12mm-diameter expansion floor fixing bolts.
In the case of the performance data provided based on SEMA, different carrying capacities are possible when using a single or double floor fixing bolts.
If one bolt floor fixing is suitable for the frame loading condition the centre hole in the footplate should be used.
If loading or frame type dicates that two floor fixing bolts are required then the two outer holes in the footplate should be used.
The size of this footplate is 108mm wide x 116mm deep x 4mm thick.
Applications:
Covers most standard applications, selection in line with loading charts.
Multi-Beam level racks-minimum number of levels: 3
Multi-Bay racks-minimum number of bays: 2
The finish is zinc plate.
