Universal Footplate
Finish: Zinc Plate
Area: 100mm wide x 100mm deep x 4mm thick
Fixing : Connection to upright 1 No M8x64 Bolt + Nyloc nut
Standard frames will be supplied with a universal footplate added to the end of the upright with a 54mm plain start.
The footplate has three holes taking either a two or single bolt fixing depends on the first beam level required to achieve the maximum frame laoding in the case of the KS section.
KM and KH frames require two bolts in each footplate, one in each of the outer holes.
12mm diameter x 100mm long floor fixings are used for fixing frames to normal concrete floors.
The minimum embedded length required is 85mm.
